Home / Products

Our Products

Meat Cutting, Forming, Battering & Breading Equipment for Meat Plants & Central Kitchens

Automatic Chicken Feet Deboning Machine

JZTGJ-8A eight-station rotary deboner for long-stem chicken feet

The JZTGJ-8A uses an eight-station rotary table to debone thawed long-stem chicken feet weighing 35–45 g. Typical output is 13–18 pieces per minute, depending on operator proficiency.

Product Overview

The JZTGJ-8A debones thawed chicken feet for poultry and snack processing. It pairs manual loading with an automatic rotary cycle, residual-bone detection and sorting to prepare intact pieces for further processing.

How the Deboner Works

An operator places each thawed chicken foot in the mould and starts the cycle. The indexed turntable moves the piece through deboning, residual-bone detection and automatic sorting. The machine accepts both left and right feet and uses an enclosed mould-flushing system.

Typical Applications

Use the deboner to prepare boneless chicken feet for pickled pepper snacks, braised chicken feet and chilled seasoned products. It suits poultry processors, snack factories and central kitchens that need consistent portions for downstream seasoning or packaging.

Technical Parameters

ParameterSpecification
Product NameAutomatic Chicken Feet Deboning Machine
ModelJZTGJ-8A
Overall dimensions1200 × 1200 × 1950 mm
Raw materialThawed fresh long-stem chicken feet, 35–45 g per piece
Body material304 stainless steel
Production capacity13–18 pieces per minute, depending on operator proficiency
Deboning stationsEight-station indexed rotary turntable
Operating modeManual loading and positioning, button start and automatic cycling
ControlsIndustrial touchscreen on the front panel
Inspection and sortingResidual-bone detection and automatic sorting of accepted and rejected pieces
Mould cleaningAutomatic enclosed mould flushing
Electrical supply220 V / 50 Hz domestic version or 200–240 V / 50 Hz export version
Installed power3.5 kW
Compressed air0.5–0.7 MPa. User supplies a 1.5 kW, 30 L air compressor.
Water supplyClean tap water
Control panel protectionIP65
Safety featuresLoading-station light curtain, independent emergency stop, open-cover stop, overload protection and earth-leakage protection

Finished Products of Equipment

Prepared boneless chicken feet on a plate
Deboned chicken feet arranged on a perforated stainless steel tray

Performance Advantages

Features and performance depend on the selected machine configuration.

Indexed deboning cycle

After manual positioning, the rotary table advances the piece through the deboning stations. The moulds accept both left and right chicken feet.

Automatic inspection and sorting

The machine checks for residual bone and separates accepted and rejected pieces, helping operators keep the output consistent.

Stainless steel and mould flushing

The stainless steel body and enclosed mould-flushing system support access and cleaning between production runs.

Ready to Discuss Your Processing Requirements?

Share your materials, target capacity and project details with our team.

Industry Application Cases

Explore food-processing applications and solution scenarios.

Frequently Asked Questions

Common questions about food-processing equipment and production requirements.

Which chicken feet can the JZTGJ-8A process?

The machine is specified for thawed fresh long-stem chicken feet weighing 35–45 g each. It accepts both left and right feet.

Does the machine need an operator?

Yes. An operator loads and positions each foot and starts the cycle. Deboning, bone detection and sorting run automatically. The listed rate is 13–18 pieces per minute and depends on operator proficiency.

What utilities are needed on site?

Confirm the 50 Hz supply for the ordered voltage version, 0.5–0.7 MPa compressed air and clean tap water. The source specification calls for a user-supplied 1.5 kW, 30 L air compressor.

Which finished products can use the deboned feet?

Typical uses include pickled pepper chicken feet, braised chicken feet and chilled seasoned chicken feet. Seasoning, cooking and packaging are downstream steps.

Can't find your question?

Contact our technical consultants for assistance with your project.

Contact a Technical Consultant

— FREE CONSULTATION —

Get A Free Consultation!

Tell us about your requirements and our team will review your inquiry.

滚动至顶部